Moxa Technologies C104H/PCI Series - Manual (Page 22)

3-8 Smartio C104H/PCI Series User’s Manual
Configuring Board and Port
Re-configure Port Setting
If the driver is installed and only desire to re-configure the ports, please refer to the
following procedures. Except procedures listed below, it is also allowed to do so by
clicking [Start] è [Program Files] è [MOXA Utility] è [MOXA
Smartio/Industio Configuration Panel] è [Property] and then also refer to step
6-21 in the previous section “First Time Installing Driver”.
1. Open [Control Panel], click [Network] icon and select [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter in Network Adapters
list
3. Click [Properties] button to open MOXA Smartio/Industio Configuration
Panel dialog box to change port setting and advanced FIFO configuration.