Marantz Model VP-10S1 - Manual (Page 30)

28
ENGLISH
❖
Sub Control
Contrast Red
: Sets how much red contrast comes out in images.
Contrast Green
: Sets how much green contrast comes out in images.
Contrast Blue
: Sets how much blue contrast comes out in images.
Brightness Red
: Sets how bright red comes out in images.
Brightness Green
: Sets how bright green comes out in images.
Brightness Blue
: Sets how bright blue comes out in images.
Clamp Position
: Sets the clamp position.
Clamp Width
: Sets the clamp width.
❖
Miscellaneous
DCDi
: Turns the DCDi feature on/off.
FRC (Frame Rate Conversion)
Auto : Basically disables frame rate conversion, but it is enabled by the vertical frequency of the input signal.
On : Enables frame rate conversion. All input signals are converted to 60 Hz.
CCS (Cross Color Suppression Function)
On : Enables cross color suppression.
Off : Disables cross color suppression. Use this mode for sources that do contain cross colors, such as progressive
scanning DVD players.
Sharpness Filter
: Sets the sharpness of DVI and RGB images.
Luminance
Chrominance
Sub Control
Miscellaneous
DCDi
FRC
CCS
Sharpness Filter
On
Auto
Off
2
FineMenu Standard 1
Luminance
Chrominance
Sub Control
Miscellaneous
Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue
0
0
0
0
0
0
Clamp Position
Clamp Width
0
0
FineMenu Standard 1
Menu item
Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue
Clamp Position
Clamp Width
Adjustment range
0 255
0 255
0 255
0 255
0 255
0 255
-128 127
-128 127
Menu item
DCDi
FRC
CCS
Sharpness Filter
Adjustment range
On Off
Auto On
On Off
0 4