Marantz Model VP-10S1 - Manual (Page 27)

25
ENGLISH
This projector uses menus to make setting and adjustment easy.
1. Press the MENU button. The MENU screen will appear on the screen.
2. Use the
3
and
4
buttons to select a main menu (Picture Adjust, Setting, System, Display, Config, Trigger 2, Preset) and
press the
2
button.
3. Use the
3
and
4
buttons to select a menu item and press the
2
button.
4. Use the
3
,
4
,
1
and
2
buttons to make the setting or adjustment of the selected item.
• The current setting or adjustment level of all items is displayed along the right side of each the menu item.
5. Press the MENU button again to close the menu. The MENU screen will go out.
❖
Picture Mode and Memory
This projector offers 4 pictures modes: Theater, Standard, Dynamic and User. Select them by pressing the THEATER, STD,
DYNA. and USER buttons on the remote controller. Moreover, each of these picture modes has 3 indexes for saving picture
quality adjustments.
Picture mode Index
Theater 1, 2, 3, Default
Standard 1, 2, 3, Default
Dynamic 1, 2, 3, Default
User 1, 2, 3
As suggested by the above table, adjust picture quality to your liking and save the adjustments in indexes 1, 2 and 3.
See “Preset” (
☞
pg. 34)
PATT.
INPUT ASPECT
MENU V-MUTE
ENTER
1, 5
2, 3, 4
PA TTERN
ENTER
INPUT
MENU
PO WER
ST ANDBY
ON
2, 3, 4
1, 5
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
How to Operate Menus
Main menu
Menu item
Setting or adjustment level