Marantz PD4292D - Manual (Page 54)

48
Setting the video signal format
Use these operations to set the video signal format.
Example: Setting the video signal format to “3.58
NTSC”
Press the 3-D1(ON) button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “INFORMATION”,
then press the 3-D1(ON) button.
The “INFORMATION” screen appears.
2. Use the ▲ and ▼ buttons to select “COLOR SYSTEM”,
then press the 3-D1(ON) button.
3. To select “3.58 NTSC” ...
Use the ᮤ and ᮣ buttons to select “3.58 NTSC”.
The mode switches as follows when the ᮤ and ᮣ but-
tons are pressed:
AUTO1 ↔ → AUTO2
PAL
↔
↔ →
4.43NTSC
SECAM
↔
PAL60
↔ 3.58NTSC
PAL-M ↔ PAL-N ↔
←
←
4. Once the setting is completed ...
Press the “OK” button to return to the main menu.
To delete the main menu, press the “OK” button once
more.
The color system is set to “3.58 NTSC”.
Information
Ⅵ Video signal formats
Different countries use different formats for video sig-
nals. Set to the format used in your current country.
AUTO1/2 ....... The video signals are automatically de-
tected and the format is set accordingly.
AUTO1: 3.58NTSC, 4.43NTSC, PAL, SECAM,
PAL60
AUTO2: PAL-M, PAL-N, 3.58NTSC
PAL(B.G) ....... This is the standard format used mainly
in the United Kingdom and Germany.
SECAM ......... This is the standard format used mainly
in France and Russia.
4.43 NTSC,
PAL60 ............
This format is used for videos in coun-
tries using PAL and SECAM video sig-
nals.
3.58 NTSC .... This is the standard format used mainly
in Japan and the United States.
PAL-M ............ This is the standard format used mainly
in Brazil.
PAL-N ............ This is the standard format used mainly
in Argentina.
I N F O R M A T I O N
FREQUENCY
LANGUAGE
COLOR SYSTEM
SEL. RETURN EXIT OK PROCEED
The “COLOR SYSTEM” screen appears.
C O L O R S Y S T E M
COLOR SYSTEM
AUTO1 :
ADJ. RETURN EXIT
C O L O R S Y S T E M
COLOR SYSTEM
3.58NTSC :
ADJ. RETURN EXIT
PD4292D-2 00.10.4, 3:11 PM 48