Marantz PD4292D User Manual

Page 5

To avoid damage and prolong operating life:

1. Use only with 120V 50/60Hz AC power supply. Con-

tinued operation at line voltages greater than 120 Volts
AC will shorten the life of the unit, and might even
cause a fire hazard.

2. Handle the unit carefully when installing it and do not

drop.

3. Locate set away from heat, excessive dust, and direct

sunlight.

4. Protect the inside of the unit from liquids and small

metal objects. In case of accident, unplug the unit and
have it serviced by an authorized Marantz Service
Center.

5. Do not hit or scratch the panel surface as this causes

flaws on the surface of the screen.

6. For correct installation and mounting it is strongly rec-

ommended to use a trained,authorized Marantz dealer.

7. As is the case with any phosphor-based display (like a

CRT monitor, for example) light output will gradually
decrease over the life of a Plasma Display Panel.

Recommendations to avoid or minimize phosphor burn-in

Like all phosphor-based display devices and all other gas
plasma displays, plasma monitors can be susceptible to
phosphor burn under certain circumstances. Certain oper-
ating conditions, such as the continuous display of a static
image over a prolonged period of time, can result in phos-
phor burn if proper precautions are not taken. To protect
your investment in this Marantz plasma monitor, please
adhere to the following guidelines and recommendations
for minimizing the occurrence of image burn:

* Always enable and use your computer's screen saver

function during use with a computer input source.

* Display a moving image whenever possible.
* Always power down the monitor when you are finished

using it.

If the SLIM SERIES PLASMA MONITOR is in long term
use or continuous operation take the following measures
to reduce the likelihood of phosphor burn:

* Lower the Brightness and Contrast levels as much as

possible without impairing image readability.

* Display an image with many colors and color gradations

(ie. photographic or photo-realistic images).

* Create image content with minimal contrast between light

and dark areas, for example white characters on black
backgrounds. Use complementary or pastel color when-
ever possible.

* Avoid displaying images with few colors and distinct,

sharply defined borders between colors.

Contact Marantz service center 1-800-270-4533 for other
recommended procedures that will best suit your particu-
lar application needs.

NOTE:
When you connect a computer to this monitor, attach
the supplied ferrite cores. If you do not do this, this
monitor will not comform to mandatory FCC standards.
Attaching the ferrite cores.
Set the ferrite cores on the both ends of the DVI cable
(not supplied), and the one end of the power cable (sup-
plied).
Close the lid tightly until the clamps click.
Use the band to secure the ferrite core (supplied).

Set side

(Plasma Monitor side)

DVI cable (not supplied)

core (small)

Connector

Power cable (supplied)

core (large)

band

PD4292D-1

00.10.4, 3:08 PM