Furuno SC-110 - Manual (Page 35)

2. OPERATION
2-7
2.6 Confirming Satellite Status
You can check the receiving condition of each antenna unit as follows:
1. Press the [MENU] key to open the menu.
2. Choose SATELLITE and then press the [ENT] key.
GPS1
N
DOP
1. 5 3D
DOP
06
04
05
01
10
12
08
North
Position-
fixing
status
Antenna
element
no.
Elevation
angle 45
°
Elevation
angle 5
°
23
- -
07
02
RX signal level
Horizontal bar extends
with signal strength.
Satellite whose signal
strength extends past
the first vertical line
is used for heading and
position calculation.
Satellites shown in white on black are
used for calculation of heading and
position.
14
18
- -
- -
9
30
- -
- -
24
18
134
WAAS
Satellite status display
3. Use ◄ or ► to choose antenna element for which to confirm receiving status.
4. Press the [DISP] key to close the menu.