Furuno SC-110 - Manual (Page 19)

1. INSTALLATION
1-9
1.3.3 Installation on the underside of a desk
The processor unit may be mounted on the underside of a desk as shown in the
figure below. Do not install it on the overhead.
Name Plate
Desk
Installation of processor unit on the underside of a desk
Bow
Stern Stern
Stern Stern
Port Starboard
Mounting Method: Invert
Mounting Direction: A Mounting Method: Invert
Mounting Direction: B
Mounting Method: Invert
Mounting Direction: C Mounting Method: Invert
Mounting Direction: D
Bow
Port Starboard
Bow
Port Starboard
Bow
Port Starboard
Name plate (other side)
Connectors
Reference Direction
POWER switch
(power lamp)
Processor Unit, rear view
Mount processor unit so
reference direction is
within
± 2.5
°
of
fore-and-aft line.
DIRECTION "A" DIRECTION "B"
DIRECTION "C" DIRECTION "D"
Mounting on underside of desk