FUNAI SV2000 WV10D6 - Manual (Page 15)

15 EN
Recording
Playing discs
Editing
Before you start
Connections
Getting started
Changing the
Setup menu
Others
Español
Connection to an Audio System
Connections
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
AUDIO OUT
VIDEO OUT
L
R
Stereo system
COAXIAL
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO
Method 1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
This unit
Note
• The audio source on a disc in a Dolby Digital Multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
If output is Dolby Digital
encoded audio, connect to
a Dolby Digital decoder.
Unless connected to a
Dolby Digital decoder.
Connecting to an MD deck
or DAT deck.
Stream
PCM
PCM
Setup >Playback >Disc Audio >Digital Out >
Dolby Digital
Setting
Connection
* To complete these settings, refer to pages 66-67.
Note
• Playing a DVD using incorrect settings may
generate noise distortion and may also damage
the speakers.