beautypg.com

2 navigating to cursor-selected point, Press the [enter/select] key – Furuno RP180 User Manual

Page 41

background image

6. NAVIGATION

6-2

6. Press the [ENTER/SELECT] key.

WPT Nos.

=

- -+- -+- -+- -+ -+- -+- -+- -+- -+- -

- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+- -

- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+- -

(Waypoint List

)

Destination Set

No. Comment

K

1 00

°

00.000'N 000

°

00.000'E

ABCDEFGHJK

2 00

°

00.000'N 000

°

00.000'E

9876543210

3

°

.

'N

°

.

'E

99

°

.

'N

°

.

'E

Select WPT and press + key.

To cancel, press - key.

Screen for entry of destination waypoints

7. Use the trackball to choose a waypoint. (A waypoint may also be entered with the

numeric keys, in which case omit step 7. If an unregistered waypoint number is entered
the buzzer sounds to alert you.)

8. Press the [+] key to set waypoint. The [-] key can be used to cancel an entry.
9. If you want to navigate to more than one waypoint, repeat steps 6 and 7.
10. Press the [ENTER/SELECT] key. Current position is marked as “00” and a dashed line

connects between it and all waypoints. This line shows the ideal course between
waypoints.

11. Press the [MENU] key to finish.

6.1.2

Navigating to cursor-selected point

1. Press [MENU] [1], [1], [6], [6] to display the Destination menu.
2. Press the [3] key to choose Mode.
3. Press the [3] key to choose Cursor is selected and press the [ENTER/SELECT] key
4. As the screen prompts, use the trackball to place the cursor on location desired for

destination and press the [+] key. (You may choose up to 30 points. To clear a selection,
press [-].)

5. Press the [ENTER/SELECT] key. Current position is marked as “00” and a dashed line

connects between it and all destination waypoints. This line shows the ideal course
between waypoints.

6. Press the [MENU] key to finish.