Furuno RP180 - Manual (Page 36)

5. WAYPOINTS, ROUTES
5-5
10. As the screen prompts, place the cursor where you want to have a waypoint for the
route.
11. Press the [+] key. (To clear just-selected point, press the [-] key.)
12. Repeat steps 10 and 11 to complete the route.
13. Press the [ENTER/SELECT] key to register the route and the [MENU] key to close the
menu.
5.4.2 Creating routes with waypoints
1. Press [MENU], [1], [1], [5], [5] to display the Route menu.
2. Press the [1] key to choose WPT no., and press the [ENTER/SELECT] key.
3. Press the [2] key to choose Speed for TTG.
4. Key in ship’s speed with the numeric keys. (This allows for automatic calculation of
time-to-go to waypoints.)
5. Press the [ENTER/SELECT] key.
6. Choose route number with the trackball.
7. Press the [ENTER/SELECT] key. The screen for selection of waypoint number appears.
Reg. Route (No. )
WPT Nos. = - -+- -+- -+- -+ -+- -+- -+- -+- -+- -
- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+- -
- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+- -
(Waypoint List)
No. Comment
↑
1 34
°
44.135'N 135
°
10.856'E ABCDEFGHJK
2 34 ° 40.236'N 135 ° 09 .211'E 9876543210
3 ° . 'N ° . 'E
4
°
. 'N
°
. 'E
5
°
. 'N
°
. 'E
9 ° . 'N ° . 'E
10
°
. 'N
°
. 'E
20
°
. 'N
°
. 'E
99
°
. 'N
°
. 'E
Select WPT and press +key.
To cancel, press -key.
Repeat above steps and press ENT to conclude.
K
Screen for entering route by waypoints
8. Choose waypoint number with the cursor and press the [+] key. (You may also enter
waypoint number with the numeric keys in which case it is not necessary to press the [+]
key.)
9. Repeat step 8 to complete the route.
10. Press the [ENTER/SELECT] key.
11. Press the [MENU] key to finish.