Hitachi C43-FL9000 - Manual (Page 13)

13
GETTING STARTED
Power on/off
POWER indicator
POWER button
TO TURN ON THE POWER
Press the POWER button on the TV set. The power indicator will light up to indicate that the power is on.
WHEN THE SET IS AT STANDBY
The TV will be in standby mode and the blue power indicator becomes dimmer if the TV set is turned off using
the button on the remote control unit. This indicates that the TV is not powered off completely and is in
low power consumption mode, waiting for your new command at anytime.
You can turn on the TV set using the button on the remote control unit. The picture will appear in a
few seconds. You can also press the PROG Ÿ / PROGźbuttons on the side panel to turn it on.
TO TURN OFF THE POWER
Press the POWER button on the TV set to turn off it. The power indicator will go off.
CAUTION: If you are not going to use this set for a long time, turn off the set using
the POWER button on the TV set and disconnect the plug from the
power outlet.
(C43-FL9000)
(C52-WD9000)