Hitachi DVP725U - Manual (Page 17)

High speed play back
¡ Turn the Shuttle Ring in either direction during play-
back. The further the ring is rotated, the faster the play-
back speed in the forward (FWD) or reverse (REV)
direction. Keeping the ring in the rotated position
cycles the playback speed every 1.5 seconds.
¡ For Video CDs, the playback speed is
Ч2, Ч8 or ×30.
For DVDs or VCDs
Slow motion
¡ Turn the Shuttle Ring in the FWD direction while
the playback is paused to activate the slow motion
mode. Keeping the ring in the rotated position cycles
the playback speed in three steps every 1.5 seconds.
(
Ч1/16-Ч1/8-Ч1/2)
¡ You also can activate the slow motion using the
remote control.
2 Press the PLAY button to return to normal
playback speed.
Notes
¡ Slow playback is not available with audio CDs.
¡ The reverse of slow playback is not available.
¡ Slow playback from a TITLE to other TITLEs is not
possible.
– 17 – EN
1L01
English
1 Press the FF SEARCH g or FR SEARCH
h button during playback.
¡ For DVDs or Video CDs, pressing the FF SEARCH
g
or FR SEARCH h button cycles the play-
back speed in four steps. In case of DVDs, the sound
will mute.
¡ For audio CDs, the playback speed is
×16 fixed.
¡ For Video CDs, the playback speed is Ч2, Ч8 or ×30.
2 Press the PLAY button to return to normal
playback speed.
¡ FAST FORWARD or REVERSE from a TITLE to
other TITLEs is not possible.
VCD CD DVD
FAST FORWARD/REVERSE
x2 x8 x30 x60
FR SEARCH Button
Button FF SEARCH
SHUTTLE FUNCTION (Main Unit)
Ч1/16 Ч1/8 Ч1/2
1.LANGUAGE OPTIONS 2.DISPLAY OPTIONS
3.AUDIO OPTIONS
4.PARENTAL
SETUP MENU
EXIT: SETUP CANCEL: RETURN SELECT: / SET: ENTER
VCD CD DVD
STARTING FROM A DESIRED TRACK
There are 2 ways you can jump to a desired track.
By using only the NUMERIC buttons.
1 Directly enter the desired track number with
the numeric buttons when the disc is being
played, stopped, or paused.
By using the ‘SEARCH MODE’ button.
1 Press ‘SEARCH MODE’
button.
¡ Track search display will show up.
2 Enter the desired track number with the
numeric buttons (If you are entering a single
digit number press “0” first).
¡ In either way, when you finish entering the number,
the selected track will start automatically.
Notes
¡ If you didn’t press “0” before entering the single
digit number, you have to press ‘ENTER’ button to
go to the desired track.
VCD CD
STARTING FROM A DESIRED
TITLE OR CHAPTER
TR: __/ 14
There are 2 ways you can jump to a desired title or a chapter.
By using the ‘SEARCH MODE’ button.
1 Press ‘SEARCH MODE’
button.
¡ Title/Chapter search display will show up.
2 If you wish to perform a title search, select
‘TT’. If you wish to perform a chapter search,
select ‘CH’ with
K / L buttons.
3 Enter the desired title or chapter number
with the numeric buttons (If you are entering
a single digit number press “0” first).
¡ When you finish entering the number, the selected
title or chapter will start automatically.
Notes
¡ If you didn’t press “0” before entering the single
digit number, you have to press ENTER to go to the
desired title or the chapter.
By using only the NUMERIC buttons.
TITLE SEARCH:
1 Directly enter the desired title number with the
numeric buttons when the disc is stopped.
DVD
TT: 1/ 12
CH: __ / 3
E5615.QX3 02.4.15 0:00 PM Page 17