Harbor Freight Tools 93253 - Manual (Page 12)

SKU 92917 & 93253 For technical questions, please call 1-800-444-3353. Page 12
Please Read the Following Carefully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY
REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Inspection, Maintenance, and Cleaning
Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil, then
wipe dry. Do not use detergent oil or additives as these lubricants will cause ac-
celerated wear to the internal seals.
Inspect the air supply filter, if present, before each use and clean or replace as
necessary. Dirt and water in the air supply filter are major causes of pneumatic tool
wear. Use a filter/oiler for better performance and longer tool life. The filter must
have adequate flow capacity for the specific application.
Store the unit in a clean and dry location.
All maintenance, service, or repairs not listed in this manual are only to be
attempted by a qualified technician.
1.
2.
3.
4.
Anytime any maintenance or repairs are done, FIRST:
1. Disconnect the Nailer from the air hose.
2. Empty the Nail Canister (90) completely.
3. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is
disconnected and is incapable of firing any nails.
4. Always leave the Nail Canister (90) open during maintenance. The Canister
is spring-loaded and may cause parts or a nail to fly out of the Nailer.