Hitachi 13VR10B - Manual (Page 25)

PRESET FOR USE
25
5 Select the year
Press CH or button repeatedly until your desired year appears.
(Example: 1996)
Then, press SELECT button.
6 Select the hour
Press CH or button repeatedly until your desired hour appears.
(Example: 5, PM)
Then, press SELECT button.
7 Set the minute
Press CH or button repeatedly until the desired minute appears.
(Example: 40)
8 Start the clock
Press MENU or SELECT button.
Although seconds are not displayed, they begin counting from 00 when you
press MENU or SELECT button. Use this feature to synchronize the clock
with the correct time.
• This unit has a built in calendar up to the year 2010.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [3]
2) Select a digit you want to change using SELECT button or ADD/DELETE
button.
3) Enter correct numbers using CH
or button.
4) Press MENU button to start the clock.
HINT!
If there is no local PBS station in your area or on your cable system, in step 2
above, select "AUTO CLOCK" and press CH
or button to show [OFF],
then adjust clock manually.