Harbor Freight Tools Auto A/C Recovery / Recharge Machine 95951 - Manual (Page 6)

Page 6 SKU 95951 For technical questions, please call 1-800-444-3353.
is cooling oil in the cooling oil bottle. Check compressor oil level to determine
it is within safe limits before starting service.
do not expose this machine to direct sunlight or rain.
9. Keep it in a well ventilated
sheltered area.
The refrigerant tank may only be filled to 80% capacity during the recovery
10.
operation. Check tank level before starting service to ensure that there is sufficient
recovery space.
there must be at least 1 kg (2.2 lb) of refrigerant in the coolant tank to perform
11.
the refilling operation. Do not attempt the refilling operation if there is less than 1
kg (2.2 lb) of refrigerant in the coolant tank.
the hp and lp valves on the Control panel must be in the CloSed position
12.
when attaching the machine to the auto A/C system.
When servicing, keep all hoses away from hot parts and moving components
13.
of vehicle engine area to prevent hose damage.
When running the vehicle, be sure it is in pARk or neutRAl with parking
14.
brakes locked and wheels chocked.
never start the vehicle or operate the vehicle A/C system if the hose is con-
15.
nected to the hp system and the hp valve on the Control panel is open.
WARning: the brass components of this product contain lead, a chemical 16.
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.)
gRounding
WARning!
improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. do not modify the power cord plug provided with the tool.
never remove the grounding prong from the plug. do not use the tool if the
power cord or plug is damaged. if damaged, have it repaired by a service facil-
ity before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.
gRounded toolS: toolS With thRee pRong plugS
Tools marked with “Grounding Required” have a three wire cord and three prong 1.
grounding plug. The plug must be connected to a properly grounded outlet. If the
machine should electrically malfunction or break down, grounding provides a low
Rev 08a