Alarm and audio, Alarm settings, Figure 4-15 – Honeywell EQUIP HD3MDIHX User Manual

Page 62: Audio and io settings tab, To configure the a

Text mode
Original mode

IP Camera Web-Client

Note

To disable a zone, click the VMD drop-down menu, then select Disable.

Alarm and Audio

Figure 4-15

Audio and IO Settings Tab

Alarm Settings

Connect external devices such as sirens or flashing lights to the alarm output connector to
signal camera users that an alarm is activated. Set the Alarm Output as Normally Open or
Normally Close. See

Connecting Alarms

on page

for more information.

When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the Web-Client screen (see

Figure 4-13

) to notify the operator.

This manual is related to the following products:

EQUIP HD3MDIH