Maintenance and servicing – Harbor Freight Tools 98233 User Manual

Page 15

SKU 98233

For technical questions, please call 1-800-444-3353.

Page 15

MaInTenance and

ServIcInG

Procedures not specifically

explained in this manual

must be performed only by a

qualified technician.

TO prevenT

SerIOuS InjurY

FrOM accIdenTal

OperaTIOn:

Turn the power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

performing any inspection,

maintenance, or cleaning

procedures.
TO prevenT SerIOuS

InjurY FrOM TOOl

FaIlure:

do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

cleaning, Maintenance, and

lubrication

beFOre each uSe,

inspect the

general condition of the tool. Check

for loose screws, misalignment or

binding of moving parts, cracked or

broken parts, damaged electrical wir-

ing, and any other condition that may

affect its safe operation.
aFTer uSe,

clean external surfaces

of the tool with clean cloth.
Periodically clear out the cooling vent

and fan with compressed air.

The ceramic nozzle (6a)

will occa-

sionally need to be cleaned of spatter

from welding. Clean it with a metal

brush. When the nozzle deteriorates

or can no longer be cleaned, it will

need to be replaced. Unscrew the

nozzle and replace it with a new one.

warnInG! If the supply cord of

this power tool is damaged, it must

be replaced only by a qualified

service technician.