Husqvarna 230 ACX/220 AC - Manual (Page 59)

60 - English
6. MENU FUNCTIONS
To:
• Activate: Move the cursor to Time lock and press
YES. Now move the cursor to Number of days
and press YES. Specify how many days you
would like Automower to mow before it requests
the PIN code. Finish by pressing YES.
When the selected number of days has elapsed,
Automower completes mowing and charges the
battery. The message Enter PIN code is then
shown on the display. You then enter your code
and press YES.
In addition, Automower will now request the
PIN-code each time the main switch is switched
to ON.
• Deactivate: Move the cursor to Time lock and
press YES. Now move the cursor to OFF and
press YES.
• Stop protection (4-1-3)
This function means that the first number of the
PIN code must be specified within 10 seconds
after the STOP button has been pressed. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
To:
• Activate: Move the cursor to Stop protection and
press YES. Select ON to activate and press
YES. Then specify for how long the alarm should
sound, by answer the question Duration of
alarm?.
• Deactivate: Move the cursor to Stop protection
and press YES. Select OFF to deactivate and
press YES. When you select OFF, the alarm
function is also deactivated.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Stop protection function. It is
recommended that this function is used.
_ _ _min
4-1-3
ON
OFF
PIN code
Time lock
Stop protection
Settings lock