beautypg.com

For your safety read before lighting, Lighting instructions, E. operating instructions for the “m” series – Hearth and Home Technologies FI42SL User Manual

Page 10: Lighting instructions, “m” series

background image

10

33734 Rev K

11/12

E. Operating Instructions for the “M” Series

Lighting Instructions, “M” Series

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion

may result causing property damage, personal injury or loss of life.

A. This appliance has an intermittent pilot. When

lighting the pilot, follow these instructions

exactly.

B. BEFORE LIGHTING smell all around the

appliance area for gas. Be sure to smell next to

the floor because some gas is heavier than air

and will settle to the floor.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electric switch; do not use

any phone in your building.

• Immediately call your gas supplier?from a

neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call

the fire department.

C. Do not use this appliance if any part has been

under water. Immediately call a qualified service

technician to inspect the appliance and to

replace any part of the control system and any

gas control which has been under water.

Due to high surface termperatures, keep children, clothing and furniture away.

Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.

LIGHTING INSTRUCTIONS

1.

STOP! Read the safety instruction label.

2.

Turn wall switch to the "OFF" position.

3.

Wait five minutes to clear out any gas. If you smell

gas, STOP! Follow "B" on the safety information

label. If you don't smell gas, go to next step.

4.

Locate pilot assembly inside unit.

6.

If appliance will not operate, follow the instructions "TO

TURN OFF GAS TO APPLIANCE" and call your service

technician or gas supplier.

TO TURN OFF GAS APPLIANCE

1.

Turn on/off switch to "OFF".

GAS

CONTROL

KNOB

FLAME

SENSOR

IGNITOR

5.

To light pilot and main burner, turn wall switch to "ON".

Do not light by hand.

34006

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

PILOT

BURNER

This manual is related to the following products: