Installing additional memory, 2500c/c+/cm – HP 2500CMHP User Manual
Page 29

3
2
1
7
If your printer has the PostScript module installed, you may install up to
64 MB of additional memory.
To do so:
1.
Put on the anti-static wrist strap and clip the other end to a grounded
metal piece.
Note: Failure to do so may damage the printer or the memory module.
2.
Switch off your printer and remove all cables from the back of the
printer.
3.
Lift up the two rear door latches to open the Rear Access Door.
25
2500C/C+/CM
HP
Installing Additional Memory
2500C/CM
Pr
ofessional Series Color Printer
HP
PostScript CD
12. Install the PostScript 3 software from the accompanying CD. Refer to
the back of the CD jacket for installation instructions.
This manual is related to the following products: