HP 2500CMHP - Manual (Page 37)

33
MIO Menu
The MIO print server that is installed controls this menu and it varies accordingly. Please refer to
the documentation that comes with the print server for more information.
Item Values Explanation
PERSONALITY= AUTO Select the default printer language
AUTO PCL (personality).
PS Possible values are determined by which valid
PCL 5 languages are installed in the printer. For
HPCGL2 example, if you have the PS module installed,
you will be able to select between AUTO, PCL or
PS. Similarly, if you have installed the PCL 5
module, you will be able to select PCL 5, PCL,
AUTO or HPCGL2.
Normally you should not change the printer
language (the default is AUTO). If you change it
to a specific printer language, the printer will not
automatically switch from one language to
another unless specific software commands are
sent to the printer.
Configuration Menu
Item Values Explanation
PRINT PS ERRORS= OFF Select ON to print the PS error page when PS errors occur.
OFF (for PostScript) ON
PRINT PCL ERRORS= OFF Select ON to print the PCL5C error page when PCL 5 errors
OFF (for PCL5) ON occur.
JAM RECOVERY= AUTO Determine how the printer behaves when a paper jam occurs.
AUTO ON
OFF
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually ON). This is the default setting.
ON: The printer automatically reprints pages after a paper
jam is cleared.
OFF: The printer does not reprint pages following a paper jam.
Printing performance might be increased with this setting.
COPIES=1 1 to 99 Set the default number of copies by selecting any number
from 1 to 99. Press [Value] once to change the setting by
increments of 1 or holddown [Value] to scroll.
RESOURCE SAVE=OFF OFF PCL5C downloaded objects are lost when the interpreter
(for PCL5 only) ON is ended
PCL5C downloaded objects are saved between active sessions
of the interpreter. When the interpreter is restarted the previous
state of the interpreter is restored.
PostScript Menu (for HP 2500CM printer or with the HP 2500C PostScript Upgrade Kit only)