Havis-Shields Vehicle Specific Console C-VS-1800-ESC-1 - Manual (Page 2)

C-VS-1800-ESC-1_INST_1-08
Carefully remove shift lever trim
bezel (unsnap)
Remove screw front lower sides
(7mm socket)
**SAVE HARDWARE**
Carefully remove top of OEM
console (unsnap)
Remove OEM console New “Z” brackets installed
**DO NOT FULLY TIGHTEN
YET**
Attach new “Z” brackets (one each
side) with previously removed
OEM hardware. (7mm socket)
Remove rear lower side screws
(10mm socket)
**SAVE HARDWARE**
Unplug 12volt socket power Remove front upper screws
(7mm socket)
2