HP 345524-B21 - Manual (Page 13)

Installing a Hard Drive
SATA Hard Drive Installation Guide 2–9
6. Connect the opposite end of the SATA data cable to the
system board as shown in the following illustration. Because
system boards vary, your system board may contain up to
two vertical SATA connectors 1 or up to two horizontal
SATA connectors 2. Horizontal SATA connectors require a
data cable with a 90 degree angled header.
Ä CAUTION: For SATA hard drives use the
SATA or legacy power connector. Do not
plug in both.
345524-B21.book 9 ページ ２００３年８月２２日 金曜日 午後４時６分