Unpacking, Assembly instructions – Harbor Freight Tools 31810 User Manual

Page 7

SKU 31810

For technical questions, please call 1-800-444-3353.

Page 7

UNPaCKINg

When unpacking, check to make sure

all that all the parts listed in the

Parts List

near the end of the manual are included.

If any parts are missing or broken, please

call Harbor Freight Tools at 1-800-444-

3353 as soon as possible.

aSSEMBLY INSTRUCTIONS

NOTE: For additional information regard-

ing the parts mentioned in the fol-

lowing pages, refer to the

assembly

Diagram near the end of the man-

ual.
Remove the Lock Washers (33a) and

Nuts (34) from the Caster (25) Studs.

33a

2. Thread a Nut (34) back onto a Cast-

er’s stud securely.
Insert the Caster’s stud into a hole at

the bottom of the Frame (2).
Slide a Lock Washer (33a) onto the

stud. Secure the Caster in place us-

ing an Acorn Nut (35).
Repeat steps 2 through 4 above for

all Casters.