Harbor Freight Tools 31810 - Manual (Page 4)

SKU 31810 For technical questions, please call 1-800-444-3353. Page 4
Store idle tools out of reach of chil- 5.
dren and other untrained persons.
Tools are dangerous in the hands of
untrained users.
Maintain tools with care.
6. Keep cut-
ting tools sharp and clean. Prop-
erly maintained tools with a sharp
cutting edge are less likely to bind
and are easier to control. Do not use
a damaged tool. Tag damaged tools
“Do not use” until repaired.
Check for misalignment or binding
7.
of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If dam-
aged, have the tool serviced before
using. Many accidents are caused
by poorly maintained tools.
Use only accessories that are
8.
recommended by the manufac-
turer for your model. Accessories
that may be suitable for one tool may
become hazardous when used on
another tool.
SERVICE
Tool service must be performed 1.
only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in
a risk of injury.
When servicing a tool, use only
2.
identical replacement parts. Fol-
low instructions in the “Inspec-
tion, Maintenance, And Cleaning”
section of this manual. Use of
unauthorized parts or failure to follow
maintenance instructions may create
a risk of electric shock or injury.
SPECIFIC SaFETY RULES
Wear aNSI-approved safety impact 1.
eye goggles, hearing protection,
and a dust mask or respirator
when operating this product.
The Housing contains a high speed
2.
Impeller that can amputate fingers,
grab loose clothing and long hair,
and propel sawdust at high velocities.
NEVER operate this product without
the all guards and screens in place
and working properly.
If using this product to help keep
3.
airborne sawdust within acceptable
limits, you must regularly monitor air-
borne sawdust and maintain the Tool
to avoid exceeding dust limits. Each
application is unique, and your main-
tenance schedule must be tailored to
your specific use.
Industrial applications must follow
4.
OSHA requirements.
Use the right tool or attachment
5.
for the right job. Do not attempt to
force a small tool or attachment to
do the work of a larger industrial tool.
There are certain applications for
which this product was designed. It
will do the job better and more safely
at the rate for which it was intended.
Do not modify this product, and do
not use this product for a purpose for
which it was not intended.
Turn off the Tool and unplug the
6.
Power Cord Plug from its electrical
outlet before changing accessories
or performing inspection, mainte-
nance, or cleaning procedures.
People with pacemakers should
7.
consult their physician(s) before use.