beautypg.com

Troubleshooting, Common problems & solutions – HP Digital VP6121 User Manual

Page 28

background image

Troubleshooting

28

User’s Guide

TROUBLESHOOTING

Common Problems & Solutions

PROBLEMS

TRY THESE SOLUTIONS

NO POWER

Make sure the power cord is inserted fully into the power cord
socket.

Make sure the power cord is inserted fully into the power outlet.

Toggle the power switch to the position “1”.

Wait two minutes after the projector is turned off before turning
the projector back on.

NO PICTURE

Check for the proper input source.

Ensure all cables are connected properly.

Adjust the brightness and contrast.

Remove the lens cap.

TRAPEZOID

IMAGE ON

THE SCREEN

Reposition the unit to improve its angle on the screen.

Use the Keystone correction key on the control panel of the
projector or the remote control unit.

POOR COLOR

In the menu system, set the picture mode according to the type of
image you are displaying: computer data presentation or video
image.

Adjust brightness, contrast, or saturation.

BLURRED

IMAGE

Press Auto Sync on the control panel of the projector or the
remote control unit to get better picture quality.

Adjust the focus.

Reposition the unit to improve its projection angle.

Ensure the distance between the unit and screen is within the
adjustment range of the lens.

REMOTE

CONTROL

DOES NOT

WORK

Replace the batteries with new ones.

Make sure there is no obstacle between the remote control and
the projector.

Stand within 6 meters (19.5 feet) of the projector.

Make sure nothing is blocking the front and rear receivers.

If you are using a remote control with mouse and page up/ down
functions, make sure you have a USB connection between the
projector and computer. Certain computer models may not be
compatible with the mouse and page up/ down functions of the
projector -- try using a different computer.

USB

CONNECTION

DOES NOT

WORK

The remote control shipped with the projector does not include
any features that use a USB connection.

A USB connection supports only certain remote control features.
See the remote control section of this table.

This manual is related to the following products: