Hotpoint MSZ User Manual

Page 20

Warning - this appliance must be earthed

Fuse replacement
If the mains lead of this appliance is fitted with a BS

1363A 13amp fused plug, to change a fuse in this

type of plug use an A.S.T.A. approved fuse to BS 1362

type and proceed as follows:

1. Remove the fuse
cover (

A) and fuse (B).

2. Fit replacement 13A
fuse into fuse cover.
3. Refit both into plug.

Important:
The fuse cover must be refitted when changing a fuse

and if the fuse cover is lost the plug must not be used

until a correct replacement is fitted.

Correct replacement are identified by the colour insert

or the colour embossed in words on the base of the

plug.

Replacement fuse covers are available from your local

electrical store.

For the Republic of Ireland only
The information given in respect of Great Britain will

frequently apply, but a third type of plug and socket is

also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,

please contact KitchenAid Service for further

instruction. Please do not attempt to change plug

yourself. This procedure needs to be carried out by a

qualified technician in compliance with the

manufactures instructions and current standard safety

regulations.

Electrical connection for Great

Britain and Ireland only