Using the appliance – Hotpoint MSZ User Manual

Page 10

Using the appliance

First use

Connect the appliance to the water system and

power supply (refer to the Installation manual).
When connecting the appliance to the power supply,

the display will show the temperatures preset by the

manufacturer.

Note: Reaching the preset temperatures requires a
variable amount of time. This time depends on several

factors (times the door is open, amount of food stored,

ambient temperature). Average time is between 2

to 3 hours.

Guide to selecting functions

Freezer temperature
The factory-set ideal temperature is -18°C.

As soon as the freezer compartment reaches the

required temperature, it is automatically displayed. To

change the temperature, press the

button until the

display shows the temperature required .

Refrigerator temperature
The factory-set ideal temperature is +5°C.

To change the temperature, press the

button until

reaching the temperature required.

Ice mode
This function enables to select the type of ice desired:

crushed ice or ice cubes

. For further information

refer to the section “Using the ice and water

dispenser” section.