HP N31.5 - Manual (Page 7)

7
Operating Voltage
& Frequency
The Nº31.5 Reference CD Transport is set at the factory (internally) for 100V, 120V,
200V, 220V, or 240V AC mains operation as appropriate for the country in which
it is to be sold. (230V/50Hz only in European Union countries, in compliance
with CE regulations.) Make sure that the label on the rear of the right tower of
the Nº31.5 (adjacent to the power cord) indicates the correct AC operating voltage
for your location, as attempting to operate the Nº31.5 at an incorrect voltage can
damage the unit.
The Nº31.5 Reference CD Transport is also set at the factory for operation on ei-
ther 50 or 60 Hz AC line frequencies, as appropriate for the country in which it is
to be sold. It will not operate if it senses an incorrect line frequency.
Warning! Neither the voltage nor the line frequency setting may be
changed by the user. There are no user serviceable parts
inside the Nº31.5. Only qualified, authorized service personnel
may open the Nº31.5 Reference CD Transport, as hazardous
voltages exist within the unit.
If the AC mains voltage or frequency indicated on your Nº31.5 is incorrect, please
contact your local, authorized Mark Levinson dealer or distributor.
The Nº31.5 can easily be powered by a normal 15-ampere AC mains line. If other
devices are also powered from the same AC line, their additional power con-
sumption should be taken into account.