HP 3Com Etherlink III 3C590 - Manual (Page 30)

12 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Connecting to a Windows NT 4.0 Server
9 Select “3COM Fast EtherLink/EtherLink III Bus Master Adapter (3C59X)”
in the “Unlisted or Updated Network Adapter” dialog box, and click “OK”.
10 Make sure that the “3COM Fast EtherLink/EtherLink III Bus Master
Adapter (3C59X)” is selected in “Network Drivers”.
11 Accept the applicable network protocols, and then click on “CLOSE”.
12 At the “Network Setup” dialog box, click on “OK”.
13 Specify your User Name, Workgroup, and Computer Name in “Microsoft
Windows Network Names” dialog box, and click on “OK”. (The Drivers
will now start to copy).
14 To complete the installation, remove the Intel diskette from the floppy
drive and click on “Restart Computer” button in the “Windows Setup”
dialog box.