Horizon Fitness EX-55 - Manual (Page 8)

BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 2
MAIN FRAME
CONSOLE WIRES
CONSOLE MAST
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
CONSOLE
MAST
BOOT
A) Open HARDWARE BAG FOR STEP 2.
B) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
BOLT (A)
20 mm
Qty: 4 SPRING WASHER (B)
18 mm
Qty: 4 FLAT WASHER (C)
20 mm
Qty: 4
SCREW (K)
10 mm
Qty: 2
EX-65 & EX-75 ONLY:
HARDWARE BAG FOR STEP 2 CONTENTS :
SCREW (K)
10 mm
Qty: 2
EX-65 & EX-75 ONLY: