Harbor Freight Tools 95578 - Manual (Page 6)

SKU 95578 For technical questions, please call 1-800-444-3353. Page 6
3. Do not use accessories which
are not specifically designed
and recommended by the tool
manufacturer. Just because the
accessory can be attached to your
power tool, it does not assure safe
operation.
4. The rated speed of the accessory
must be at least equal to the
maximum speed marked on the
power tool. Accessories running
faster than their RATED SPEED can
break and fly apart.
5. The outside diameter and the
thickness of your accessory must
be within the capacity rating of
your power tool. Incorrectly sized
accessories cannot be adequately
guarded or controlled.
6. The arbor size of wheels,
flanges, backing pads or any
other accessory must properly
fit the spindle of the power tool.
Accessories with arbor holes that do
not match the mounting hardware of
the power tool will run out of balance,
vibrate excessively and may cause
loss of control.
7. Do not use a damaged accessory.
Before each use inspect the
accessory such as abrasive
wheels for chips and cracks,
backing pad for cracks, tear or
excess wear, wire brush for loose
or cracked wires. If power tool or
accessory is dropped, inspect for
damage or install an undamaged
accessory. After inspecting and
installing an accessory, position
yourself and bystanders away
from the plane of the rotating
accessory and run the power tool
at maximum no-load speed for one
minute. Damaged accessories will
normally break apart during this test
time.
8. Wear personal protective
equipment. Depending on
application, use face shield,
safety goggles or safety glasses.
As appropriate, wear dust mask,
hearing protectors, gloves
and workshop apron capable
of stopping small abrasive or
work piece fragments. The eye
protection must be capable of
stopping flying debris generated
by various operations. The eye
protection must be capable of
stopping flying debris generated by
various operations. The dust mask
or respirator must be capable of
filtering out particles generated by
your operation. Prolonged exposure
to high intensity noise may cause
hearing loss.
9. Keep bystanders a safe distance
away from work area. Anyone
entering the work area must wear
personal protective equipment.
Fragments of work piece or of a
broken accessory may fly away and
cause injury beyond immediate area
of operation.
10. Hold power tool by insulated
gripping surfaces only, when
performing an operation where
the accessory may contact
hidden wiring or its own cord. An
accessory contacting a ″live″ wire
may make exposed metal parts of
the power tool ″live″ and shock the
operator.