HP 200T - Manual (Page 167)

HP AIT data cartridges
Q1996A/Q1997A/Q1998A/Q1999A/Q2005A
Product Specifications
Exceptional strength and durability, reduced error rates and long recording life
• Optimum compatibility with HP StorageWorks AIT tape drives and libraries and AIT drives
and libraries from other manufacturers.
• HP AIT drives and media employ a helical scan recording method in which data tracks are
written at an angle with respect to the edge of the tape. This technique requires fewer passes
over the drive heads to fill the tape and thus greatly enhances the life span of both the drive
and media.
• HP AIT data cartridges contain an Advanced Metal Evaporated (AME) recording layer
consisting of almost 100% cobalt. This, combined with the Diamond-Like-Carbon (DLC)
coating, creates a smooth and hard surface. AME technology enables a high recording
density, improved signal-to-noise ratio and significantly lower tape tension to improve the
longevity of the media.
• MIC (Memory in Cassette) is a 64k memory chip which is embedded in all HP AIT data
cartridges. It allows high-speed media load, file search and read/write access. MIC offers
fast load and unload times and access to data in less than 27 seconds – from anywhere
on the tape.
• Limited lifetime warranty.
06:05
P/N Description Qty. Dimension (H x L x W) Weight UPC Code
Q1996A HP AIT cleaning cartridge 1 62.5 x 95 x 15 mm 79 g 8 08736-401883
Q1997A HP AIT-1 data cartridge 1 62.5 x 95 x 15 mm 79 g 8 08736-40189 0
Q1998A HP AIT-2 data cartridge 1 62.5 x 95 x 15 mm 79 g 8 08736-40190 6
Q1999A HP AIT-3 data cartridge 1 62.5 x 95 x 15 mm 79 g 8 08736-40191 3
Q2005A HP AIT bar code label pack 100 .23 x 304 x 238 mm 90g 8 08736-61712 3