6 • installing the motor housing – Hunter Fan 2A User Manual
Page 11
11
42834-01 • 02/14/12 • Hunter Fan Company
6 • Installing the Motor Housing
6-1. Place the fan housing over the motor.
6-2. Align the keyholes in the fan housing with the two partially
installed canopy screws in the hanger bracket. Rotate the fan
housing to situate the screws in the narrow ends of the keyholes.
6-3. Install the two remaining canopy screws into the holes in the fan
housing and into the hanger bracket. Securely tighten all screws.
6-4. Install the rubber plugs into the holes over the canopy screws.
Canopy
Screw
Step 6-1
Motor
Step 6-3
Fan Housing
Step 6-4
See also other documents in the category Hunter Fan Faxes:
- 23483 (4 pages)
- 21585 (2 pages)
- 28425 (4 pages)
- Type 7 Models (16 pages)
- 41753-01 (15 pages)
- 28343 (2 pages)
- 41844-01 (9 pages)
- 28439 (2 pages)
- 41081-01 (12 pages)
- 28487 (2 pages)
- 28544 (2 pages)
- 20810 (2 pages)
- Type T Models (13 pages)
- 20490 (2 pages)
- 23971 (2 pages)
- 22562 (4 pages)
- 23867 (4 pages)
- 20400 (2 pages)
- 28876 (4 pages)
- 22793 (4 pages)
- 22068 (4 pages)
- Type B Models (15 pages)
- 28872 (2 pages)
- 28608 (2 pages)
- 23683 (2 pages)
- 20081013 (24 pages)
- 20406 (2 pages)
- 21575 (4 pages)
- 28522 (4 pages)
- 23864 (2 pages)
- 21977 (1 page)
- 22540 (4 pages)
- 20543 (2 pages)
- 23972 (4 pages)
- 20347 (4 pages)
- 28448 (3 pages)
- 23785 (4 pages)
- 41615-01 (4 pages)
- 20534 (2 pages)
- 23264 (2 pages)
- 28153 (2 pages)
- 28081 (4 pages)
- 21190 (2 pages)
- 23782 (4 pages)
- 21580 (2 pages)