Harman-Kardon HD 990 - Manual (Page 12)

12
HD 990
Repeat Play Operation
Repeat Play
the hd 990’s programming system enables you to repeat either a single track, the entire
disc (respectively all programmed tracks) or a specially programmed passage that you
select.
Repeat One Track
to repeat the track in play, press the repeat button f once. the repeat and 1
indicators will light and the track will continue to play over and over again continuously. If
the track is changed by pressing the skip buttons 7 8 h while the repeat function
is in use, the newly selected track will be played normally. to stop the repeat play, press
the stop button 6 k or press the repeat button f until the repeat indicator goes
out.
Repeat All Tracks
to repeat all of the tracks on a disc during play mode, press the repeat button f until
the repeat and all indicators light up. When you see these indicators, the entire disc or all
programmed tracks will play through to the end, and then start again from the beginning.
the disc will play continually until the stop button 6 k is pressed.
Repeat A-B
the cd player may be programmed to repeat any section within a track, or a complete
passage or program that includes material in a series of tracks.
to program the unit for a-B play, first locate the point on the disc where you wish to
begin the repeated section. at that point, press the repeat a-B button g. the repeat
indicators will light in the Information display and an a- indicator to show that the
program process has started. let the disc continue to play or press the search —
button 7 8 h or skip fl· button 7 8 h on the front or remote until
you have reached the end of the section to be repeated. When the end point is reached,
press the repeat a-B button g again. note that the repeat and a-B indicators will
now be illuminated.
once the repeat a-B button g is pressed for the second time to complete the
programming, the cd player will automatically go to the beginning of the selected
passage and continue to play the section over and over.
to resume normal play press the repeat a-B button g again. the repeat and a-B
indicators will go out, and the rest of the disc will play normally.
Important Note: tracks programmed as described in “programmed play” on page
11 can be repeated too. When you press repeat f once after a program is created
(the program indicator must be lit, otherwise press program d) and the program is
played, the repeat 1 indicator will light and the track currently playing will be repeated
continuously. If repeat is pressed twice, repeat all will be displayed, all programmed
tracks will be played subsequently and the sequence will be repeated continuously until
stop 6 k is pressed.