beautypg.com

Harbor Freight Tools 45861 User Manual

Page 4

background image

Page 4

SKU 45861

For technical questions, please call 1-800-444-3353.

Unmodified plugs and matching out-

lets will reduce risk of electric shock.
avoid body contact with grounded

b.

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.
do not expose power tools to rain

c.

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.
do not abuse the cord. never

d.

use the cord to unplug the power

tool. keep cord away from heat,

oil, sharp edges or moving parts.

Damaged or entangled cords in-

crease the risk of electric shock.
if operating a power tool in a damp

e.

location is unavoidable, use a

ground Fault circuit interrupter

(gFci) protected supply. Use of

a GFCI reduces the risk of electric

shock.
personal safety

3.

Stay alert, watch what you are do-

a.

ing and use common sense when

operating a power tool. do not use

a power tool while you are tired

or under the influence of drugs,

alcohol or medication. A moment

of inattention while operating power

tools may result in serious personal

injury.
use safety equipment. always

b.

wear anSi-approved eye protec-

tion. Safety equipment such as dust

mask, full face shield, heavy-duty

work gloves, non-skid safety shoes,

hard hat, or hearing protection used

for appropriate conditions will reduce

personal injuries.

remove any adjusting key or

c.

wrench before turning the power

tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.
do not overreach. keep proper

d.

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.
dress properly. do not wear loose

e.

clothing or jewelry. keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.
if devices are provided for the con-

f.

nection of dust extraction and col-

lection facilities, ensure these are

connected and properly used. Use

of these devices can reduce dust-

related hazards.
power tool use and care

4.

do not force the power tool. use

a.

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.
do not use the power tool if the

b.

switch does not turn it on and off.

Any power tool that cannot be con-

trolled with the switch is dangerous

and must be repaired.
disconnect the plug from the

c.

power source before making any

adjustments, changing accesso-

ries, or storing power tools. Such

preventive safety measures reduce

the risk of starting the power tool ac-

cidentally.
Store idle power tools out of the

d.

reach of children and do not allow

persons unfamiliar with the power

This manual is related to the following products: