Harbor Freight Tools 45861 - Manual (Page 10)

Page 10 SKU 45861 For technical questions, please call 1-800-444-3353.
tion generated by the Lathe during
operation. The cabinet recommend-
ed for use with this Lathe is SKU
46378; this product is available from
Harbor Freight Tools.
Use a hoist or a forklift to lift the
3.
Lathe onto the cabinet or workbench.
Mount the Spacer Blocks. The Lathe
4.
must be completely level, left-to-right
and front-to-back, or the Lathe will
not mill properly and may become
damaged.
Mount the dip tray.
5.
Thread on the belt tensioner lever. 6.
The unpainted surfaces are coated 7.
with a waxy oil to protect them from
corrosion during shipment. Remove
the coating with a solvent cleaner or
citrus-based degreaser. Avoid chlo-
rine-based solvents since they will
damage the paint.
when connecting
or removing the
chuck, take care to protect the
ways by placing a piece of
wood, or other guard, over
them. damaging the ways
may permanently disable the
lathe.
Functions
The Lathe can be used to shape 1.
metal, make screws, and bore screw
threads.
Operating inStructiOnS
read the entire iMpOrtant
SaFetY inFOrMatiOn section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
tool Set up
tO prevent
SeriOuS injurY
FrOM accidental
OperatiOn:
turn the power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Settings for the spindle, chuck, gibs, 1.
ways, and ends, will be determined
by the length of the stock and the
intended operation.
The Lathe speed must be set to “0”
2.
before restarting.
workpiece and work area Set up
Designate a work area that is clean 1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route the power cord along a safe
2.
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage.
Secure loose workpieces to prevent
3.
movement while working.
Definition of Terms
apron: The front part of the carriage
assembly where the carriage hand-
wheel is mounted.