haier XQB100-96 - Manual (Page 11)

Using this button to switch on or off the power. When the power is on ,
the relevant indicator light will be lighted.
Circumvolve this knob, the following programs can be
selected solely: wash, strong, stanard, gentle, spin
Paraphrase of the program
Program the occasion total time (min)
Wash Just washing , the water can be usedrepeatedly. About 6 not including inleting water
About70 not including inleting water Strong Including soking, it is the same with the very dirty clothing.
Standard The common washing
Gentle
Spin Only needing spining after washing with hands
Using process Using process
5 Select water level
RESET
HIGH
LOW
MEDIUM
WATER LEVEL
WATER LEVEL KNOB
Three water levels available according to the laundries quantity:
High; Medium; Low.
Page 8
After the water inlet as per the preset water level, in case
additional water quantity is required, please first set the button
to the "RESET", and perform automatic water inlet. When it
reaches the suitable water level, you can turn it to the preset
water level.
After the water inlet under set water level, if higher water level is
needed, please first turn the knob to " Reset ", then turn back to
needed water level. The washing machine will fill water to the
new water level automaticly.
6 Press the POWER button
When the washing is over , it will switch off the power automatically.
7 Select program
Mode and meaning of the indicator light
The frame of indicator is not lighted.
the frame of the indicator is flashing : indicate the running program.
the frame of the indicator is on : indicate the program about to run,
or indicate the selected mode
the frame of the indicator is flashing rapidly: indicate abnormal condition.
Washing woolen textile or underwear About23 not including inleting water
About40 not including inleting water
About7 not including draining water