haier XQB100-96 - Manual (Page 10)

3 Add the detergent
Using process Using process
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
Washing power with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
It is suggested not to use high sudsing detergent.
The powder is more prone to pollute the laundries than
the detergent. Therefore please use it with proper quantity.
The instant dissolving of the washing powder:
1. Prepare warm water of 30
and a container.
2. Add the powder while stirring to fully dissolve it.
How to use the whitener
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For whitener powder, please dissolve it before use.
Standard dosage of the detergent and water quantity(suggest)
Laundries
quantity
(kg)
Water
level
Water
quantity Common powder, Concentrated powder,
Add 40g in each 30L water Add 25g in each 30L water
High
Medium
Low
4 Close the top lid
If you open the top lid,
the machine will stop
working during spinning.