HP 463777-001 - Manual (Page 34)

5–2 Maintenance and Service Guide
Specifications
This table provides physical and performance specifications for the hard drive.
Dimensions
Height
Width
Weight
25.4 mm
89 mm
499 g
Logical geometry
Cylinders
Heads
Sectors
16,383
16
63
Interface type AT 16 bit Total logical sections 2,001,382
Data transfer rate
Disk to buffer
Interface with or with IORDY
45 Mbytes/sec
16.6 Mbytes/sec
Disk rotational speed 7200 rpm
Seek times (typical read, including setting) Average latency 5.5 ms
Single track
Average
Maximum
3 ms
13 ms
24 ms
Spin-up time (maximum) 7.0 s
Physical geometry
Cylinders
Heads
Sectors
158,518
4
ID 528-710
OD 998-1216
Spin-down time
(maximum) 100 S
Operating temperature 5°C to 55°C (41°F to 131°F)
✎
Certain restrictions and exclusions apply. Consult Help and Support for details.
*Total storage capacity is 300 billion bytes (for hard drives, 1GB = 1 billion bytes); actual accessible capacity is less. Actual
drive specifications may differ slightly.