Harley-Davidson B3160 - Manual (Page 25)

25
• Continue to slide the wheel axle through the extended
hex bushing, wheel, extended hex bushing and then
the shock.
• Fit a .437 (large diameter) cap nut on the end of the
wheel axle.
• Support the opposite end of the wheel axle and tap the
cap nut with a hammer to secure it on the end of the
wheel axle.
• Pull on the .437 cap nut to make sure the front wheel
assembly is secure.
Shock
.437 (Large
Diameter)
Cap Nut
Wheel
Axle
.437"
.437 Cap Nut
53
• Completely tighten the four screws in the front handlebar
assembly to secure the handlebars.
Tighten
Screws
Tighten
Screws
54
Assembly