Harley-Davidson B3160 - Manual (Page 18)

18
Assembly
Tassel
Staple
Handgrip
• Using a slotted screwdriver, push the staple in the center
of a tassel into the hole in the end of a handgrip.
• Repeat this procedure to attach the other tassel to the
other handlebar.
29
Plug Fork Cover
• Position the front fork so that it is upright and facing you.
• Insert the handlebar harness plug through the upper
hole in the front fork. Do not insert the plug through
the lower hole in the front fork.
Handlebar
Harness
Upper
Hole
30
• Turn the front fork assembly around so the back is
facing you.
• Slide the end of the wire cover into the upper hole in the
front fork, as shown.
• While making sure the handlebar harness plug remains
inserted through only the upper hole in the front fork,
slide the right handlebar down through the upper and
lower holes in the front fork.
Front
Fork
Handlebar
Harness
Plug
Right
Handlebar
Handlebar
Harness
31
32
Back View
Front Fork
Assembly
Upper Hole in
Front Fork
End of
Wire Cover
DO NOT insert
the plug through
the lower hole in
the front fork!