beautypg.com

Side, Sonar x-press, Menu – Humminbird 531438-1_A User Manual

Page 24

background image

40

Side

(WideSide® transducer: WideSide® view only)

Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide® View.
A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side menu
choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer
Select
) and can only be accessed from the Sonar X-Press

TM

menu when you are in WideSide® view.

NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.

To adjust the Side:

1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is

connected, then highlight Side on the Sonar X-Press

TM

menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.

(L [Left], Both, R [Right], Default = Both)

39

Sonar X-Press

TM

Menu

The Sonar X-Press

TM

Menu provides access to the settings most

frequently-used. Press the MENU key once while in any of the
Sonar Views to access the Sonar X-Press

TM

Menu.

NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode or what transducer
is currently selected.

Sonar X-Press

TM

Menu

531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:52 PM Page 46