beautypg.com

Harbor Freight Tools 94855 User Manual

Page 4

background image

11.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes,
jewelry, or long hair can be caught in moving parts.

12.

Avoid accidental starting. Be sure the Power Switch is off before plugging in.
Carrying power tools with your finger on the Power Switch, or plugging in power
tools with the Power Switch on, invites accidents.

13.

Remove adjusting keys or wrenches before turning the power tool on.
A wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.

14.

Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.

15.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

16.

Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform.
Holding the work by hand or against your body is
unstable and may lead to loss of control.

17.

Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.

18.

Do not use the power tool if the Power Switch does not turn it on or off. Any
tool that cannot be controlled with the Power Switch is dangerous and must be
replaced.

19.

Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool.
Such preventive safety
measures reduce the risk of starting the tool accidentally.

20.

Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.

21.

Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier to
control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

SKU 94855

PAGE 4