HONDA 2009 Civic Coupe - Manual (Page 330)

Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it unlocks.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To change the driver’s side bulb,
start the engine, turn the steering
wheel all the way to the right, and
turn off the engine. To change the
passenger’s side bulb, turn the
steering wheel to the left. Use a Phillips-head screwdriver to
remove the screw from the inner
fender, and pull the inner fender
cover back.
Reinstall the inner fender cover.
Then reinstall the screw and
tighten it securely.
4.
5.
6.
7.
8.
3.
2. 1.
Lights
Replacing the Front Side Marker/
Parking/Turn Signal Light Bulb
Ma
int
e
na
nce
327
2009 Civic Coupe
Table Of Contents Main Menu