beautypg.com

HONDA 2009 Civic Coupe User Manual

Page 127

background image

You can use any of five methods to
find radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.

Use the TUNE knob to

tune the radio to a desired frequency.
Turn the knob to the right to tune to
a higher frequency, and turn it to the
left to tune to a lower frequency.

The scan function samples

all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.

If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.

The seek function

searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the

or

side of the

SEEK/SKIP button, then release it.

The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM/FM
button. Adjust the volume by turning
the power/volume knob.

The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction in
AM is not available.

To Select a Station

TUNE

SCAN

To Play the AM/FM Radio

SEEK

Playing the AM/FM Radio (Models without navigation system)

124

2009 Civic Coupe

Table Of Contents

Main Menu

This manual is related to the following products: