HONDA 2009 Civic Coupe - Manual (Page 240)

CONTINUED
To find out the status of the phone being
used, do this: To change from the currently linked
phone to another paired phone, do this:
Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’ Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
If no other phones are found or
paired, the first phone remains
linked. For example, HFL
responds ‘‘No other paired phones
were found/have been paired.
Returning to
John’s phone .’’
Some Phones may not send the
status information to the HFL
system.
Press and release the Talk button.
After the beep, say ‘‘Status.’’ For
example, HFL responds ‘‘John’s
phone is linked. Battery strength
is three bars. Signal strength is
five bars, and the phone is
roaming.’’ Press and release the Talk button.
After the beep, say ‘‘Next phone.’’
HFL responds ‘‘Searching for the
next phone.’’
The system then disconnects the
linked phone and searches for
another paired phone. If the
system finds it, for example, HFL
responds ‘‘Paul’s phone is linked.’’ 2.
1. 1.
2.
Bluetooth HandsFreeLink
Fe
a
tu
re
s
237
2009 Civic Coupe
Table Of Contents Main Menu