Husqvarna TAC 345e - Manual (Page 39)

English – 39
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
345e TrioBrake 346XP TrioBrake 353 TrioBrake
Engine
Cylinder displacement, cm
3
45,0 45,0 51,7
Cylinder bore, mm 42 42 45
Stroke, mm 32,5 32,5 32,5
Idle speed, rpm 2700 2700 2700
Power, kW/ rpm 2,2/9000 2,5/9600 2,4/9000
Ignition system
Manufacturer of ignition system SEM SEM SEM
Type of ignition system CD CD CD
Spark plug NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Zama Zama Zama
Carburettor type C3-EL 32 C3-EL 18B C3-EL 18B
Fuel tank capacity, litre 0,5 0,5 0,5
Oil pump capacity at 9,000 rpm, ml/min 9 5-12 5-12
Oil tank capacity, litre 0,25 0,28 0,28
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 5,0 346XP: 5,1 353: 5,2
346XPG: 5,2 353G: 5,3
346XPG E-tech: 5,2 353G E-tech: 5,3
Noise emissions (see note 1)
Sound power level, measured dB(A) 112 346XP, 346XPG: 113 353, 353G: 114
346XPG E-tech: 110 353G E-tech: 111
Sound power level, guaranteed L
WA
dB(A) 113 346XP, 346XPG: 114 353, 353G: 115
346XPG E-tech: 113 353G E-tech: 112
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
100,5 102 102
Vibration levels (see note 3)
Front handle, m/s
2
3,1 3,7 3,1
Rear handle, m/s
2
3,5 4,0 3,2
Chain/bar
Standard bar length, inch/cm 13"/33 13"/33 13"/33
Recommended bar lengths, inch/cm 13-18”/33-45 13-20"/33-50 13-20"/33-50
Usable cutting length, inch/cm 12-17"/31-43 12-19"/31-49 12-19"/31-49
Pitch, inch/mm 0,325/8,25 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3 0,050/1,3
0,058/1,5 0,058/1,5 0,058/1,5
Type of drive sprocket/number of teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 17,3 18,5 17,3