haier L32A9 - Manual (Page 21)

19
Menu operation
AFC: It can be set to On and Off. While it is set to On, the TV set will detect the TV (6)
signal automatically, and in case of offset of the signal within a certain range, it can
adjust the channel to the correct position.
Program list: Press > to enter the sub-menu as shown in the following diagram
4.
It is possible to edit the program list according to the indications at the
bottom of the menu. While selecting a different program with the Up/
Down key in the program list, it will switch to the currently selected
program automatically in 3 seconds.
V. VGA setting (the following menus only appear in the VGA
mode)
Auto adjust: Adjust the PC picture to the optimal position 1.
H. Position: Adjustable from -50 to 50, adjust the horizontal position of the picture. 2.
V. Position: Adjustable from -50 to 50, adjust the vertical position of the picture. 3.
Clock, Phase: Adjustable from -50 to 50, adjust the effect of the picture display. 4.