HP 2010 - Manual (Page 37)

B Technical Specifications
All specifications represent the typical specifications provided by HP's component manufacturers;
actual performance may vary either higher or lower.
HP LCD Monitors
Face treatment: Glare polarizer with hard coating
Input terminal:
● VGA connector
● DVI-D 24–pin D-type connector (select models)
● HDMI connector (select models)
Table B-1 Model 1910m
Specifications:
Display Type: TFT LCD active matrix
Viewable Image Size: 47.0 cm (18.5 in.) diagonal
Tilt –5° to +25°
Maximum Weight (unpacked): 4.05 kg (8.9 lb)
Dimensions (h x w x d): 355 x 470 x 184 mm (14.0 x 18.0 x 7.2 in.)
Maximum Graphics Resolution: 1366 x 768 @ 60 Hz analog mode
Optimum Graphics Resolution: 1366 x 768 @ 60 Hz analog mode
Text Mode: 720 x 400
Dot Pitch: 0.30 x 0.30 mm
Horizontal Frequency (analog mode): 24 to 83 kHz
Vertical Frequency (analog mode): 50 to 76 Hz
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature: 5° to 35° C (41° to 95° F)
Non-Operating Humidity: –20° to 60° C (–4° to 140° F)
Relative Humidity (non-condensing):
HP LCD Monitors 31